Technical blog
Practical guides on transformer maintenance and testing
Field-tested technical knowledge for maintenance managers — what tests to run, how to read them, and when to act.
Transformers and substations for data centers (Tier III/IV)
In a data center, the electrical substation is the asset whose failure brings everything down. What Tier III/IV reliability demands from transformers and substations — redundancy, power quality and condition-based upkeep.
Ver másElectrical infrastructure for nearshoring in Mexico
Power, not real estate, is becoming the bottleneck for nearshoring in Mexico. Transformer lead times, the condition of existing assets, and how to keep a new plant energized reliably.
Ver másRehabilitate or replace a power transformer?
One of the most expensive decisions in asset management, often made on a hunch. The factors that should actually drive repair vs. replace — with diagnostic data, not pressure.
Ver másHow to choose a transformer repair shop
Choosing who repairs a critical transformer is a high-stakes decision. The criteria that separate a real shop from a risky one: capability range, independence, instrumentation, documented protocol and verifiable references.
Ver másYour transformer just failed: what to do in the first hours
A transformer out of service halts production and the clock is ticking. What to do and avoid in the first hours, what data to gather before you call, and why re-energizing blindly can turn a repairable fault into a total loss.
Ver másWhat electrical tests does my transformer need?
Each test isolates a different failure mode. This is the guide to knowing which test your transformer needs and what each result tells you.
Ver másHow to interpret transformer oil analysis and DGA
The oil tells the internal story of the transformer. Learn to read DGA and physicochemical parameters to anticipate failures before they happen.
Ver másShell-type vs. column transformer: differences and repair
Shell-type or column is not a minor detail: it changes how the transformer is repaired and how few workshops can do it. Here is the difference and what it implies.
Ver más7 signs your transformer is about to fail
A transformer rarely fails without warning. These are the 7 signs that anticipate failure and how to confirm them before the equipment leaves you without power.
Ver másHow much it costs NOT to maintain a transformer
Maintenance looks like an expense until the transformer fails. This is the real cost of not doing it — and why it almost always ends up ten times more expensive.
Ver másHow often should a power transformer be maintained?
There is no single calendar. The right frequency depends on criticality, load and environment. This is the technical reference to define your program.
Ver másTalk to a transformer specialist
Tell us about your asset and we'll respond with a diagnosis and a tailored quote — not generic pricing.