Video
Transformer silica gel breather explained
- Duration
- 32 seconds
- Language
- Spoken in English
- Captions
- English captions, switchable from the player
- Published
- Published November 12, 2026
What is behind this video
A bottling-plant transformer breathes. That jar of orange beads is not decoration: when the oil heats it expands and pushes air out; when it cools, it pulls outside air in. From cold to hot, volume can change by up to 10%. If the beads changed color, wet air gets in and the water ends up in the paper.
It is not decoration. Oil expands as it heats and pushes air out; as it cools it contracts and pulls outside air in. The jar of desiccant dries that air before it enters. From cold to hot, oil volume can change by up to ten percent, so the unit really does breathe through that breather.
The gel is saturated and is no longer drying the incoming air. Exact colors depend on the brand — orange to green, or blue to pink — which is why the video talks about a color change, not one specific shade. Once wet air gets in, the water does not stay in the jar: it ends up in the paper.
In rainy weather the outside air carries more moisture. Each time the transformer cools and breathes, that air passes through the gel. If the desiccant is already spent, water enters the system and ends up in the cellulose. Checking the bead color is a simple inspection that keeps the unit's lung in service.
The references behind what the video says are: Oil volume change from cold to hot, up to ~10%.
This piece is animation and typography: it does not show TEVKO personnel. The figures are the ones in the script and can be checked against this page and the linked pages.
Transcript — English audio
Did you know a bottling plant's transformer breathes, and in rainy season gets wet? That jar of orange beads isn't decoration.
When load rises, the oil heats, expands, and pushes air out. When it drops, it shrinks and pulls outside air in.
From cold to hot, its volume changes up to 10 %. It's like breathing through a face mask: once it's soaked, it filters nothing.
But watch out: if the beads changed color, wet air gets in and the water ends up in the paper. So it's not a jar.
It's a lung. Comment LUNG and we'll tell you how to read yours.
The same captions ship as a WebVTT track inside the player. The spoken close invites a comment on the network where the video was posted. On this page the contact is ventas@tevko.com and the phone +52 33 2101 7241.
Questions this video answers
What is a transformer silica gel breather for?
It is not decoration. Oil expands as it heats and pushes air out; as it cools it contracts and pulls outside air in. The jar of desiccant dries that air before it enters. From cold to hot, oil volume can change by up to ten percent, so the unit really does breathe through that breather.
What does it mean if the silica gel beads changed color?
The gel is saturated and is no longer drying the incoming air. Exact colors depend on the brand — orange to green, or blue to pink — which is why the video talks about a color change, not one specific shade. Once wet air gets in, the water does not stay in the jar: it ends up in the paper.
Why does the breather matter more in the rainy season?
In rainy weather the outside air carries more moisture. Each time the transformer cools and breathes, that air passes through the gel. If the desiccant is already spent, water enters the system and ends up in the cellulose. Checking the bead color is a simple inspection that keeps the unit's lung in service.
Related pages
Technical content reviewed by TEVKO Technical Management · last reviewed: November 12, 2026
Request a technical assessment
Write to our sales inbox with the following and we will tell you what the next step is:
- The nameplate: rating, voltage, make and serial number.
- The location of the installation.
- The problem the unit presents, or the event that occurred.