TEVKO, transformadores y subestaciones de potencia

Video

Substation gravel and touch voltage

Duration
44 seconds
Language
Spoken in English
Captions
English captions, switchable from the player
Published
Published November 15, 2026

What is behind this video

Substation gravel is a protective layer. In a ground fault, current spreads through the soil and a voltage appears between a person's feet and what they touch. Gravel conducts very poorly and adds a high-resistance layer between the ground and the body, like a rubber mat when using a power tool.

The video cites a study using IEEE 80: tolerable touch voltage went from about 460 volts on concrete to almost 2,500 volts on gravel. The figure depends on each study; what doesn't change is that the gravel layer increases the safety margin.

Gravel only protects when clean, complete and thick enough. Dirt, weeds or gaps defeat it because those spots conduct better than stone, so substation inspection checks the surface layer along with the ground system measurement.

This piece is animation and typography: it does not show TEVKO personnel. The figures are the ones in the script and can be checked against this page and the linked pages.

Transcript — English audio

Why is a substation floor covered in stones?

It's not decoration, it's protection.

In a ground fault, current spreads through the soil and a voltage appears between your feet and what you touch.

Gravel conducts very poorly and puts a high-resistance layer between the ground and your body.

Like standing on a rubber mat to use a power tool.

In a study using IEEE 80, the tolerable touch voltage went from about 460 volts on concrete to almost 2,500 on gravel.

But careful, it only protects if it's clean, complete and thick enough; with dirt, weeds or gaps it loses its effect.

So they're not stones, it's a safety layer.

Does yours have weeds or gaps?

Comment GRAVEL and we'll tell you what to check.

The same captions ship as a WebVTT track inside the player. The spoken close invites a comment on the network where the video was posted. On this page the contact is ventas@tevko.com and the phone +52 33 2101 7241.

Questions this video answers

What is gravel for in a substation?

It adds a high-resistance layer between the ground and the body, reducing the current that could flow through a person during a ground fault.

How much does it improve safety?

In the IEEE 80 study cited in the video, tolerable touch voltage went from about 460 volts on concrete to almost 2,500 volts on gravel.

When does gravel stop protecting?

With dirt, weeds, gaps or too little thickness. It only protects when clean, complete and thick enough.

Does TEVKO check gravel and grounding?

Yes, as part of substation maintenance and ground system measurement. Contact ventas@tevko.com.

Related pages

Technical content reviewed by TEVKO Technical Management · last reviewed: November 15, 2026

Request a technical assessment

Write to our sales inbox with the following and we will tell you what the next step is:

  • The nameplate: rating, voltage, make and serial number.
  • The location of the installation.
  • The problem the unit presents, or the event that occurred.
ventas@tevko.com